rachel
| Subject: Cable pulling lubricant Basic information Sun Oct 09, 2011 1:19 pm | |
| Name:Cable pulling lubricant CAS No:161338-83-6
1. Introduction of Cable pulling lubricant Cable pulling lubricant is a kind of excellent and practical lubricant, and it could stretch the cable in normal temperature. It has the good lubricating properties which could greatly reduce the requied tensile force when cable goes across the conduit and corner.
2. Basic Information of Cable pulling lubricant 1). Quality Standards of Cable pulling lubricant
Cable pulling lubricant has the quality standards which are as below: (1)Appearance: Light yellow gellike; (2)Smell: No off flavor; (3)Boiling point: 100 °C; (4)pH value: 7±0.5; (5)Volatile matter (V,%): <90; (6)Specific gravity(H2O=1): 0.97±0.02; (7)Solubility: Water-soluble.
2). Application of Cable pulling lubricant Using Cable pulling lubricant in cable lying is the most efficient method which could bring considerable economic benefits and social benefits. Currently, the advanced method of cable laying in most of countries is pipeline lubrication which is safe and efficient. The service life of normal cable in far more than 30 years, but it sometimes happens premature failures, 90 percent of which are caused by damaged installation. The traditional method of cable lying is pipe traction. No matter manual traction or mechanical traction, it will easily cause tensile mechanical damage of the cable. The traction force on the cable in far exceed the allowable value of standard requirements, due to the big frictional coefficient of pipeline inner wall. It is the tendency of international development to use safe, efficient, durable cable pulling lubricant which could reduce the cable traction by 2/3.
3). Usage Method of Cable pulling lubricant Cable pulling lubricant could be spreaded on cable surface by hand or brush, and it could also be used to lubricate the pipe inner as pipe inserting lube. You could use water or soap water to wash it after the usage, with no adhesive feeling.
4). The advantages of Cable pulling lubricant Cable pulling lubricant has the following superiorities:: (1). Convenient to use; (2). Cleans up easily with soap and water; (3). Environmentally safe - non-toxic, non-flammable and non-corrosive; (4). Not adhesive to skin and clothes.
3. Storage Period of Cable pulling lubricant Cable pulling lubricant could be kept sealed for 18 months in room temperature.
4. Package of Cable pulling lubricant Cable pulling lubricant could be packed through the following ways: 350 ml/bottle, 36 bottles/CTN, 1000 ml/bottle, 20 bottles/CTN, 5 gallons/plastic bucket. |
|